AC interference between co-located pipelines and high voltage AC powerlines can result in safety hazards to operating personnel and the public under powerline steady-state and fault conditions. Under steady-state conditions, AC voltages are induced on the pipeline via electromagnetic coupling. Under fault conditions, high AC […]
An AC interference study was conducted in 2019 following a utility development project that included constructing a new substation and upgrading approximately 24 km of new AC transmission powerline sections in Alberta, Canada. The study comprised six transmission powerlines owned by one utility and eight […]
The new NACE Standard SP21424-2018 provides a set of simple criteria for assessing the risk of AC corrosion on existing collocations between powerlines and cathodically protected pipelines. However, the task of developing design criteria for new collocations is left to the pipeline operators. This paper […]
An AC interference study was conducted in 2015 following the installation of a new 240 kV powerline in a remote area of Alberta, Canada. The calculations indicated severe risk of AC corrosion for the paralleling pipelines and safety hazards for pipeline personnel, especially under fault […]
Literature dating back to the early 1960’s has shown that AC current can cause corrosion of cathodically protected steel under laboratory conditions. Until recently however, there has been little evidence to suggest that AC corrosion of cathodically protected structures may be of practical concern. In […]
